Your overhead door (or garage door) might be the most overlooked part of your garage. It just has two things to do in its entire life: to open and close. But when it stops functioning the way it did and then you start noticing the important role it plays. Overhead doors repairs are generally doable; however, sometimes it needs professional service to be repaired. Clifton Overhead Doors services are always available.  

Is your overhead door opening and closing slower than it used to? Or is it completely stuck in a position? Are there loose bolts? Whatever your problems are, here we provide you some DIY repairs. But remember, it is always advised to seek assistance from a professional service. 

 

 

  1. Check for loose bolts and screws which can be found along the sides of the tracks. If you see some, tighten them. The changing temperature of the environment can cause nuts, hinges, and bolts to expand or contract. 

 

  1. Examine the roller and tracks. Clean the tracks and rollers with brush and a good solution. This way, you will be removing stains and dirt that might cause the door opening and closing slowly. After washing and drying, lubricate them.

 

  1. Make sure that tracks are properly aligned. If you notice they are not aligned, just loosen a bit of the bolt or screws that are holding the mounting brackets. Tighten them again after re-positioning. 

 

Lubrication is an important DIY quick fix. You will know that the parts of your door need lubrication when you are hearing scraping metal, because of the increased friction. It is not just annoying, but also a notice that something needs to be done.  

 

  1. Check if your garage is wet from the rain, or if lights are sneaking in the garage. This indicates that you need to change the weather seal. This is inexpensive so long as you choose the right size and type of seal. 

 

  1. When your overhead door is spring-operated, check up on your pulleys and cables. Replace them if necessary.

 

  1. Test the auto-reverse functionof your overhead door. They are designed to reverse automatically and lift the door if something has obstructed it. Also, check the batteries inside your remote-control door. These batteries can last up to one year. Change them if necessary. However, if the door is the problem, and the reverse function is no longer working. That just means you need to replace your door as it imposes safety hazards.

 

WHY DO YOU NEED A PROFESSIONAL? 

We provided you some DIYs above and if careful planning and application will be done, your safety is almost guaranteed. However, there are many reasons why a professional service is a better option. First, overhead boards are big and heavy. Second, they have many different parts that could be complicated to fix and work on to keep your door balanced. Third, there are cases where people doing DIY tips result in further damages to their overhead door; worse, some even result in injury and accidents.